H-typ hydraulický hlubokotažný lis 100/40 tun

CRONOSSTECH CHSP 100/40

CRONOSSTECH CHSP 100/40

H-Frame Hydraulic Deep Drawing (Spinning) Press – 8 Slideways

General Description

The CRONOSSTECH CHSP series H-frame hydraulic deep drawing presses are designed with a double-acting principle to ensure controlled material flow in sheet forming, deep drawing, and spinning applications. The H-frame structure with 8 slideways offers maximum rigidity during pressing, while parallelism and perpendicularity tolerances are stably maintained throughout the stroke.

The CHSP 100/40 model is engineered for precise deep drawing and spinning operations, featuring a 100-ton main ram and a 40-ton lower blank holder (pot). The frame construction is stress-relieved by vibration to ensure long-lasting and reliable operation.

⚙️ Standard Equipment

- Steel construction, H-frame with 8 slideways
- Stress-relieved body structure by vibration
- Bronze Zr14 slideway bearings
- WPQR and WPS approved welding operations, accredited by TÜRK-AK
(EN ISO 15614-1:2017 / EN ISO 14731)
- Design and manufacturing in accordance with CE standards
- PLC controlled hydraulic system
- Touch panel display (DELTA 7”)
- Adjustable ram and pot stroke control
- Adjustable ram and pot tonnage (pressure) control
- Automatic lubrication system
- Electronic filter contamination warning
- On-screen monitoring of hydraulic unit oil temperature and system status
- Cooling system
- Off-line filtration
- Safety systems for operator protection
- SIEMENS – SCHNEIDER switchgear components

📐 Technical Specifications – CHSP 100/40

Type: Steel construction, H-frame with 8 slideways
Frame Material: St52 – ERDEMİR
Slideway Bearings: Bronze Zr14
Capacity (Ram): 100 Ton
Capacity (Pot): 40 Ton
Moving Table Size: 1000 × 1200 mm
Fixed Table Size: 1000 × 1200 mm
Parallelism Tolerance: 120 microns/m
Perpendicularity Tolerance: 60 microns/m
Stroke (Ram): 600 mm
Stroke (Pot): 200 mm
Min. Daylight: 100 mm
Max. Daylight: 700 mm
Phjdpjx N T Uyjfx Af Rsa
Stress Relief: Vibration
Welding Application: WPQR and WPS approved by TÜRK-AK, in compliance with EN ISO 15614-1/2017, supervised by certified welding coordination engineers under EN ISO 14731
Max. Working Pressure: 250 Bar
Total Motor Power: 11 kW – IE3
Main Pump: 22 cm³ – REXROTH or PARKER
Moving Table Rapid Descent Speed: 150 mm/s
Moving Table Drawing Speed: 12 mm/s
Moving Table Return Speed: 170 mm/s
Pot Table Forward Speed: 30 mm/s
Main Cylinder Inner Diameter: Ø230 mm – Ck45
Pot Cylinder Inner Diameter: Ø140 mm – Ck45
Auxiliary Acceleration Cylinders: 2 units
Approximate Height of Press: 3400 mm
Approximate Width of Press: 2950 mm
Approximate Depth of Press: 2000 mm
Lower Table Height from Floor: 1250 mm
Main Pre-fill Valve: NG 100
Hydraulic Unit: REXROTH or PARKER
Cooling System: EMMEGI – CIESSE – PARKER
Off-line Filtration: REXROTH or PARKER
Linear Position Transducer: NOVATECHNIK or TURCK
PLC System: DELTA
Touch Panel Display: DELTA 7”
Switchgear Components: SIEMENS – SCHNEIDER
Approximate Weight: 9 Ton

Manufacturing Note

This machine is manufactured by CRONOSSTECH in Turkey.

Inzerát byl přeložen automaticky a mohou se vyskytnout chyby překladů.